Belt Conveyor Transfer Point Dust Extraction System

Filquip was engaged by an engineering contractor to specify and supply a dust extractor for a belt transfer point at a quarry following a Barmac crusher. The transfer point between the belt conveyors generated dust clouds after the rocks had been crushed by the Barmac unit releasing dust.

Filquip specified and supplied a FPHT.R.24 Filter Bag Dust Extractor with 4kw Fan Motor which was mounted on the belt transfer point to extract the dust generated and agglomerate it to larger/heavier particle sizes and return it to the belt. The covering of the belt conveyor back to the Barmac Crusher creates a suction funnel to draw dust down through the crusher and into the Dust Extractor.

Dust from belt conveyer

 

Belt Conveyor Transfer Point Dust Extractor

 

 

Belt Conveyor Dust Extraction System

Filquip was engaged by an engineering contractor to specify and supply a dust extractor for a belt transfer point at a quarry. The transfer point between the screen deck hopper and the belt transfer point generated dust clouds which traveled along the belt conveyor and into the screen house and then the local environment.

Filquip specified and supplied a FPHT.D.12 Filter Bag Dust Extractor with 2.2kw Fan Motor which was mounted on the belt transfer point to extract the dust generated and agglomerate it to larger/heavier particle sizes and return it to the belt.

Belt Conveyor Transfer Point Duct Extractor

 

Belt Conveyor Dust Extraction Systems