Filquip has released an Instructional Video on how to setup the extension kits for the Torex ILT series of level indicator. Torex ILT Level Indicators and all the different sizes of extension kit are available off the shelf from Filquip, for more information please call or email contact us at sales@filquip.com.au
Tag: Silo Overfill Protection
VHS Pressure Relief Valve Servicing in 5 Minutes – Filquip
Filquip has released an Instructional Video on how to setup, service and maintain a WAM VHS Silo Pressure Relief Valve (Stainless Steel Version) in 5 minutes. The WAM VHS Pressure Relief Valve Series are available off the shelf from Filquip, for more information please call or email contact us at sales@filquip.com.au
- Excess Pressure up to 900 mm H2O at a flow rate of 5,000m³/hour (0.09 Bar or 1.3 PSI at 2,950 cfm).
- Vacuum/Negative Pressure up to -50 mm H2O at a flow rate of 1,900m³/hour (-0.005 Bar or -0.07 PSI).
- Stainless Steel 304 Casing with Mild Steel or Stainless Steel Upstand to connect to your silo.
- Casing Diameter 273mm
- Available with Duct to Ground kit.
Open VHS Stainless Steel Pressure Relief Valve Brochure
Filquip has also released a video on the setup of the VHS.C Polymer Pressure Relief valve.
Silo Overfill Protection System – New Website Page
Filquip has a new Silo Overfill Protection Website page and Brochure available now.
The Filquip overfill protection silo safety system consists of all the required items for ensuring the silo being filled cannot be over pressurized or overfilled and eliminates dust emissions:
- Control panel – Available with key control to ensure the correct product is filled into the correct silo and with the ability to manage multiple silos.
- Pinch valves – Controls and isolates different silo fill lines.
- High level indicator – Provides feedback when the silo has reached a pre-set high level.
- Differential pressure switch or electronic pressure meter – Measure in silo pressure.
- Pressure Relief Valve (PRV) – Safety valve to release excess pressure in silo.
- Dust collector – Venting of excess air without any dust emissions.
- Ducting kit to vent to ground – Ducting from the PRV and Dust Collector to ground.
- Wear bends/elbows – Abrasion resistant pipe bends and elbows for the silo filling lines.
- Pneumatic fittings – Air regulators, fittings and airline required for pneumatic plumbing.