Filquip has developed a new Clamp Mounted Hammer Vibrator for sandblaster tanks, also known as blast pots or pressure pots. It is a bolt-on flow aid for one of the most common frustrations in abrasive blasting: sand or grit that stops flowing partway through a job.
The Problem: Abrasive Bridging Inside the Blast Pot
Portable sandblasters, such as the common 20 gallon (76L) units, hold abrasive media in a tank that narrows to a metering valve at the bottom. When the media packs together, it can form an arch, or “bridge”, over the outlet. The abrasive above stays in the tank while flow to the blast hose drops off or stops completely.
Bridging is more likely when:
- The abrasive has picked up moisture from humid air or the compressed air supply.
- Fine or angular media is used, as it locks together more readily.
- The tank has been left full between jobs and the media has settled and compacted.
The usual fix on site is to stop work and strike the side of the tank with a hammer or bar. This costs blasting time, gives inconsistent results and can dent and damage the tank, which is a pressure vessel. A vibrator applies the same kind of impact in a controlled, repeatable way.
Our Solution: OLI K Series Pneumatic Vibrator on a Clamp Mount
The Filquip Clamp Mounted Hammer Vibrator combines an OLI K series linear piston pneumatic vibrator with a clamp mount that fits around the tank. The mount is based on a steel U-bolt and polyamide pipe saddle, which Filquip machines to suit the vibrator. The linear piston delivers repeated directional impacts into the tank wall, similar to a hammer blow but without striking the tank by hand. This helps break up bridged media and promote the flow of abrasive down to the metering valve.

Key features:
- No welding or drilling: the mount clamps around the tank with the U-bolt and polyamide saddle, so the pressure vessel itself is not modified.
- Sleeved U-bolt: the U-bolt is sleeved to help protect the tank surface.
- Runs on compressed air: blasting sites already have a compressor on hand, so no electrical supply is needed.
- Adjustable: vibration frequency is adjusted by air pressure, from 2 to 6 bar.
- Lube-free design: the K series lube-free (LF) vibrator is a maintenance-free design and is supplied with a silencer.
- Removable: the clamp mount can be removed and refitted to another tank of the same diameter.

Available in Multiple Tank Diameters
The mount shown is made for sandblaster tanks of 300/323mm nominal diameter, a size that covers many popular portable blast pots. Filquip can also supply clamp mounts for other tank diameters. Send us your tank diameter and blasting media, and our team will recommend a suitable K series vibrator and mount.
For sites running several vibrators or flow aids from one air supply, see our compressed air distribution manifold.
Enquire Today
Filquip has been trading since 1999 and is an agent for OLI vibrators. To discuss a Clamp Mounted Hammer Vibrator for your sandblaster tank, contact our team on (07) 3208 3499 or email sales@filquip.com.au.
