Clamp Mounted Vibrators for Pipework and Small Vessels
Filquip supplies pneumatic hammer vibrators on clamp mounts for pipework, chutes and small vessels. A clamp mount holds the vibrator firmly against the pipe or vessel wall without welding, drilling or any other modification to the equipment being vibrated.
Clamp mounted vibrators are an alternative to a permanent welded vibrator mount. They suit applications where welding is not desirable, or where a removable mount is required.
When to Choose a Clamp Mount Instead of a Welded Mount
A welded mount is the usual choice for permanent installations on silos, bins and hoppers. On pipework and small vessels, a clamp mount is often the better option. Typical reasons include:
- Welding is not desirable: stainless steel pipework in food, feed or pharmaceutical plants, lined or coated pipes, galvanised pipework and pressure vessels, where welding could damage the surface, the lining or the vessel itself.
- Hot work is restricted: sites where hot work permits, shutdowns or isolation make welding difficult or costly.
- A removable mount is required: the vibrator can be removed for maintenance or cleaning, or moved to another pipe or vessel of the same diameter.
- Trialling the mounting position: the clamp can be repositioned along a pipe or outlet to find the most effective location before committing to a permanent installation.
- Portable equipment: small vessels such as sandblaster tanks and mobile hoppers, where the vibrator needs to stay with the equipment but cannot be welded on.

How the Clamp Mount Works
The Filquip clamp mount uses a steel U-bolt that wraps around the pipe or vessel and passes through a polyamide saddle. The saddle is machined to suit the vibrator, which mounts directly to it. Tightening the hex nuts draws the saddle hard against the pipe wall, so the impact from the vibrator is transferred into the pipe or vessel and the material inside it. The U-bolt is sleeved to help protect the pipe surface.

OLI K Series Pneumatic Hammer Vibrators
Filquip fits its clamp mounts with OLI K series linear piston pneumatic vibrators. The K series is light and compact and produces directional vibration that is particularly effective for detaching material from pipe and vessel walls.
- Runs on compressed air, so no electrical supply is required at the vibrator.
- Vibration frequency is adjusted by air pressure, from 2 to 6 bar.
- Maintenance-free design, supplied with a silencer and air nipple.
- Available in multiple sizes, with lube-free (LF) versions that do not need an oiler in the air line.
For multiple vibrators on one air supply, see our Flow Aid Compressed Air Distribution Manifold.

Typical Applications
- Gravity chutes and downpipes where powders or granules hang up or build up on the pipe wall.
- Small hopper and bin outlets feeding rotary valves, screw conveyors and screw feeders.
- Sieve, screener and mixer outlets.
- Dosing system pipework in water and wastewater treatment plants.
- Sandblaster tanks and blast pots. See our Clamp Mounted Hammer Vibrator for Sandblaster Tanks.
Made to Suit Your Pipe or Vessel Diameter
Each clamp mount is made to suit the outside diameter of the pipe, tube or vessel it will be fitted to. Filquip can supply clamp mounts for all standard tube and pipe outside diameters from 50mm nominal size up to 500mm nominal size.
Standard sizes available:
| Nominal Size | Tube OD | Pipe OD |
|---|---|---|
| 50mm | 50.8mm | 60.3mm |
| 65mm | 63.5mm | 73.0mm |
| 80mm | 76.1mm | 88.9mm |
| 100mm | 101.6mm | 114.3mm |
| 125mm | 127.0mm | 141.3mm |
| 150mm | 152.4mm | 168.3mm |
| 200mm | 203.2mm | 219.1mm |
| 250mm | 254.0mm | 273.1mm |
| 300mm | 304.8mm | 323.9mm |
| 350mm | 355.6mm | 355.6mm |
| 400mm | 406.4mm | 406.4mm |
| 450mm | 457.2mm | 457.0mm |
| 500mm | 508.0mm | 508.0mm |
To help us select the right vibrator size and mount, please send us:
- The pipe or vessel outside diameter and wall material.
- The material being handled and how it is currently behaving (bridging, build-up or hang-up).
- The compressed air supply available on site.
You can also complete our Vibrator Sizing Form.
Looking for other removable vibrator mounts? See the MagBase Switch Magnetic Vibrator Mounting Bracket for steel structures and the VibBase Suction Vibrator Mounting Bracket for stainless steel and plastic hoppers.
Enquire About Clamp Mounted Vibrators
Filquip has been trading since 1999 and is an agent for OLI vibrators, with one team covering design, supply, installation and service. To discuss a clamp mounted vibrator for your pipework or vessel, contact us on (07) 3208 3499 or email sales@filquip.com.au.
