Filquip has a new Dense Phase Conveying Brochure detailing the advantages of a Dense Phase Conveying system for materials handling.
Detailing the different models that can be provided to convey almost any product at flow rates up to 100T/h and distances up to 500m. Dense phase systems are perfect for conveying hard to handle products and can be filled from Bulk Bag Unloaders, Silo’s, Hoppers, Chutes, Screw Conveyors and most other filling equipment types.
Some of the advantages include:
High product conveyed to Air used ratio = Energy saving and cost saving
Filquip is proud to represent Savi Water Treatment Equipment in Queensland, Australia.
The Savi range includes:
Rotating Drum Screens (Pre-MBR and Standard)
Screenings Washer Compactors
Grit Classifiers
Septage Recieval Stations
Pista Grit Circular Traps
Belt Screens
Step Screens
Mechanical Bar Screens
Band Screens
Sludge Thickeners
Travelling Bridges
Clarifier Bridges
Overflow Spillways
Penstocks
Sand Washers
The Savi Pre-MBR Rotating Drum Screen is the standard for solids capture to protect the plant membrane bio reactor, with over 15 operating screens across Australia and New Zealand.
Filquip has a new Silo Overfill Protection Website page and Brochure available now.
The Filquip overfill protection silo safety system consists of all the required items for ensuring the silo being filled cannot be over pressurized or overfilled and eliminates dust emissions:
Control panel – Available with key control to ensure the correct product is filled into the correct silo and with the ability to manage multiple silos.
Pinch valves – Controls and isolates different silo fill lines.
High level indicator – Provides feedback when the silo has reached a pre-set high level.
Differential pressure switch or electronic pressure meter – Measure in silo pressure.
Pressure Relief Valve (PRV) – Safety valve to release excess pressure in silo.
Dust collector – Venting of excess air without any dust emissions.
Ducting kit to vent to ground – Ducting from the PRV and Dust Collector to ground.
Wear bends/elbows – Abrasion resistant pipe bends and elbows for the silo filling lines.
Pneumatic fittings – Air regulators, fittings and airline required for pneumatic plumbing.
Filquip is proud to supply the Torex IPE Electronic Pressure Meter and IPM Mechanical Pressure Meter for monitoring of the pressure inside bins or silos during their filling from tankers and specifically during the purging of then tanker truck.
The pressure sensor membrane is self-cleaning and temperature resistant
The casing is aluminium alloy with IP55 protection rating.
Available with 4-20 mA output signal configurations for the IPE.
24VDC supply voltage.
IPX mounting spigot available for simple installation onto any silo
If your installing a new truck or tanker filled silo storage system or upgrading an existing silo system then the IPE/IPM Pressure meter is a key component for managing over pressurisation before the relief valve is activated, thus avoiding any emissions to the surroundings.
Filquip has recently completed trials of its Filter Press units on the wash
out water from concrete trucks. The concrete returned from the job to the batch plant is washed out of the agitator truck into a pit or concrete reclaimer system (See WAM Consep concrete reclaimer). The wash water is separated from the sands and aggregates but contains suspended solids preventing it from being discharged to the sewer or re-used in concrete production.
A three plate trial Filquip filter press was setup and processed 3.6m3/hr of the reclaimed water slurry separating the suspended fines out.
Filtering the reclaimed water reduces the costs of using vacuum trucks to clean out the settled solids in tanks.
The new Heavy Duty magnetic vibrator mounting bracket is now available from Filquip. The Filquip MagBase is made from Stainless Steel 304 and uses strong rare earth magnets to hold the vibrators against the steel formwork, hopper walls, silos or bins requiring vibrating.
The MagBase handles allow easy movement of vibrators around the steel structure being vibrated and also provides protection for the air fittings on the vibrator from being accidentally damaged.
The Oli range of Pneumatic vibrators available for direct mounting to the bracket includes the OR100, OT36S, OT36, OT30, S36 or S30. Giving a wide range of vibration forces and amplitudes to suit the vibration requirements.
Filquip is pleased to launch its new website for January 2017. Our new website showcases all of the major products and services Filquip supplies across its 5 major divisions; Bulk Materials Handling, Vibration & Aeration, Water & Waste Water Treatment, Industrial Filtration and Pneumatic Conveying.
Brochures on our products are available to download from links on each page.